Why is Plastering Important and How to Perform it?

 Building a house is like a dream for everyone and making that house a reality is an even bigger dream. From the first floor of the house to the last finish it is a long one and important processes.

However, after building the house, wall plastering plays one of the most important roles in providing beauty to the house. Imagine your house without plaster!

How a picture emerges, right?

And the contribution of wall plastering starts from this place. But not only beauty, but this wall plaster also protects everything from the brick of the wall to the outside of the wall from the sun, storm and water.

But it can be seen to a large extent that even after plastering, the plaster is falling off from the wall after some years. And what is that for?

The one and only to be exposed to large amounts of water from the outside. Water makes the plaster material weak and there starts to appear dampness and eventually the plaster falls off.

But it does not end here.

This dampness leads to cracking which makes the wall weaker and due to the flaking of the plaster the wall color becomes pale as a result the beauty of the house is completely lost.

So, what's the way?

The way is waterproofing wallplaster.

Currently, the adhesive industry in India is very big, and the quality of products for various construction chemical companies has increased tremendously.

One such company is Mapei, which is constantly researching product quality and new products. And for that reason, they are not behind in waterproofing wall plaster products. Their waterproofing products and services have been trusted by people for a long time.

So, by now, it is understood that plastering is needed for our house and better said, waterproofing wall plaster is needed.

But the cause or utility of plastering is much greater. So let us tell all that information.

Advantages of Waterproofing Wall Plastering:

1.       In any drywall, plastering increases the wall's strength and provides it with a more gleaming and powerful appearance. To make the bond and walls stronger, the reaction that occurs during the procedure is crucial.

2.       Making a surface that is smooth makes painting easier. Better-looking walls can be achieved through painting.

3.       Plastering a wall makes it possible to add texture and pattern to the wall.

4.       It leaves surfaces with a flawless finish and is less likely to cause surface cracking.

5.       There is a 3°C temperature drop in the walls and ceilings.

So, wall plastering is useful or not?

Useful, right?

But when it is so useful, then it is necessary to know the way to do it.

Right?

But there is no reason to worry. There are many companies to take on the responsibility of protecting your whole house.

But so much responsibility cannot be given to ordinary people. But there are many construction chemical companies who have been doing this for a long time.

One such company is the Mapei. Their proper waterproofing wall plastering products and chemicals are absolutely appropriate.

Then you can easily get your required product from now.

But before that, let's know how to plaster.

Steps Of Wall Plastering:

Preparing Wall and Making the Plaster Mix:

To clean the wall of any more dirt and dust, use a paintbrush. Brush the bricks with water just enough to make the plaster adhere. In front of the wall, spread out drop cloths.

Don your dust mask, safety glasses, and gloves to protect yourself. Fill your mixing bucket with water. Three buckets of sand, one-half of cement, and one-half of lime should be added. Combine all the ingredients in the mixer.

And there are lots of waterproofing adhesives, chemicals that we can use to increase the durability of that mixture.

Applying the Mixture:

Work from right to left and from top to bottom when putting a plaster on the wall. The mortar should be applied on the wall evenly.

Start at the bottom of a brick and spread the plaster up two to three bricks, using the brick lines as a guide. Till the entire wall is covered, keep adding plaster.

Screed the Wall:

Screed the wall once the plaster is touch-dry. Drag the straight edge along the wall to accomplish this. To give the wall a good level surface, spackling removes any extra plaster.

Keep the straight edge level as you move from one side of the wall to the other. Make your way back across the wall after that.

Patch Up & Cut the Corners:

There may be spots where the plaster is uneven or spotty after the final screed. Plaster should be applied with a trowel and hawk.

The top and bottom of the wall, as well as the left and right sides, should all have the side of the trowel running down them. This will ensure that the plaster is level with the floor, ceiling, and walls. Plaster that has fallen to the floor can be scraped off with the trowel.

Wrapping Up:

So, when the cause, utility and means are all known, what are you waiting for? Leave the responsibility of home security as per your requirements to the company of your choice.

But the adhesive industry in India is really very big, and therefore it is advisable to entrust the responsibility to the person whose name is on everyone's lips.

And there again the name of a company like Mapei comes up.